Its working principle is as follows:
When the load decreases, the speed of the drive shaft driven by the crankshaft increases, the centrifugal force of the flyball increases, and the speed rod moves to the right. Therefore, the rocker rotates counterclockwise with point A as the center, the slide valve moves to the right, and the pressure oil enters the right space of the servo cylinder. At the same time, the left space of the cylinder is connected to the low-pressure oil circuit through the oil hole, and the oil in it is discharged. Under the action of the pressure difference, the servo piston drives the injection pump rack to move left to reduce the oil supply. When the speed returns to the original value, the slide valve also returns to the central position, and the adjustment process ends.
When the load increases and the speed decreases, the speed regulation process proceeds in the opposite direction.
From the above analysis, it can be seen that the centrifugal force generated by the speed governor flyball is only used to push the slide valve, so the weight size of the flyball can be made smaller. The force of the hydraulic servo as an amplifier can be amplified by selecting servo pistons of different sizes and different lubricating oil pressures according to needs.
However, in this governor, because the sensing element directly drives the slide valve, no matter which direction it moves, it is difficult to accurately return to the original position and close the oil hole. This makes the diesel engine speed unstable and produces serious fluctuations.
In order to make the governor stable, a device must be added to the governor. Its function is to produce a reaction to the slide valve while the servo piston moves, so that it moves towards the balanced position and reduces the possibility of diesel engine speed fluctuations. This device is called a feedback mechanism.
Hydraulic Speed Governor Without Feedback
Aug 14, 2024
Leave a message

