GE IC695PSA040 Universal Backplane Power Supply
Overview
GE IC695PSA040 is a 40-watt universal backplane power supply for the PACSystems RX3i series. It primarily provides power to the RX3i system's modules, enabling the CPU to detect power loss or log related fault codes.
Note: Inadvertent installation of the IC695PSA040C and earlier in the same backplane as other RX3i power supplies may cause damage.
If the required number of modules exceeds the capacity of this power supply, additional modules must be installed in an expansion or remote backplane, or a power supply that supports capacity expansion must be used.
🚀Function & Features
- High-voltage protection: When using the IC695PSA040, the power cover must be closed (risk of electric shock when operating at 120/240V AC). Wires must be inserted until the insulation stops.
- Anti-interoperability: Do not use the same backplane with older IC695PSA040C and earlier models.
- Wiring specifications: Each terminal accepts AWG 14 to AWG 22 wires. Wire stripping lengths must be at least 3/8 inch (9 mm) and no more than 11 mm (0.433 inches). The insulation must contact the insulation stop inside the terminal.
-
40 W total output power, designed for standard-load GE RX3i PACSystems rack configurations
- Universal auto-ranging input, supporting both AC and DC industrial power sources without manual switching
- Built-in overvoltage, overcurrent and overtemperature protection to prevent system and module damage
Specifications
|
Specification |
Details |
|
Part Number |
IC695PSA040 |
|
Series |
PACSystems RX3i Universal Backplane (IC695 Series), occupies 2 slots |
|
Input Voltage |
120/240 Vac or 125 Vdc Nominal |
|
Load Capacity |
40 W Total, All Loads |
|
Isolation (input to backplane) |
250 Vac continuous; 1500 Vac for 1 minute |
|
Wiring |
14 AWG to 22 AWG, 1 wire per terminal |
|
Total Output Power
|
40 W
|
|
AC Input Frequency
|
47 Hz ~ 63 Hz
|
|
DC Input Voltage Range
|
100 VDC ~ 300 VDC
|
|
Rack Slot Occupation
|
2 Slots
|
|
Protection Grade
|
IP20
|
|
Operating Temperature Range
|
-10 ℃ ~ 55 ℃
|
|
Dimension
|
46 mm × 142 mm × 127 mm
|
|
HS Code
|
85371011
|
|
Weight
|
0.42 kg
|
Model comparison
|
Model
|
Output Power
|
Redundancy Support
|
Application Scenario
|
|
IC695PSA040
|
40 W
|
Non-Redundant
|
Standard low and medium load RX3i rack configuration
|
|
IC695PSA140
|
140 W
|
Non-Redundant
|
High-load multi-module RX3i system configuration
|
Questions & Answers
💡 FAQ
Q: What is GE IC695PSA040 used for?
A: The GE IC695PSA040 is a 40 W universal backplane power supply, specially designed to provide stable DC power distribution for GE RX3i PACSystems PLC racks and internal modules.
Q: What input voltage does IC695PSA040 support?
A: It supports universal wide-range input, including 85 VAC ~ 264 VAC AC power and 100 VDC ~ 300 VDC DC power, adapting to diverse industrial power environments.
Q: What is the brand?
A: GE
Q: What is the type?
A: Universal Backplane Power Supply
Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059276824
sales7@nseauto.com
Hot Tags: ge ic695psa040 universal backplane power supply, ge ic695psa040 universal backplane power supply manufacturers, suppliers