GE IC695LRE001 Serial Bus Transmitter Module
Overview
GE IC695LRE001 is a Serial Bus Transmitter Module, which belongs to the PACSystems RX3i series. Its main function is to realize the communication between the RX3i universal backplane (IC695 model) and the serial expansion backplane and remote backplane (IC694 or IC693 model). It builds a data transmission bridge between the universal backplane and the serial expansion backplane by converting the signal levels required by the universal backplane and the serial expansion backplane.
Note: Hot-swap is not supported, and power must be turned off for installation/removal.
🚀Function & Features
- Specific communication: IC695LRE001 is specifically designed for communication between PACSystems RX3i Universal Backplane (IC695 model) and Serial Expansion/Remote Backplane (IC694 or IC693 model).
- Fixed installation position: IC695LRE001 must be installed in the dedicated expansion connector on the right end of the Universal Backplane and cannot be installed in other slots at will.
- Independent control of expansion backplanes: Expansion backplanes and remote backplanes can be powered off separately without affecting the operation of other backplanes; however, power failure will generate a "LOSS_OF_MODULE" fault in the PLC fault table for each module in the backplane until power is restored, during which time these modules will not be scanned.
Specifications
|
Component |
Details |
|
Model |
IC695LRE001 |
|
Cable Type |
Computer cable with overall braid over foil shield, twisted-pair construction |
|
Approved Cable |
Belden 8107 (no substitutes permitted) |
|
Conductor |
24 AWG (0.22mm²) tinned copper, 7 x 32 stranding |
|
Voltage Rating |
30V at 80°C (176°F) |
|
Propagation |
Velocity = 70% |
|
Impedance |
Nominal 100 Ohms |
|
25-Pin Male Connector |
• Crimp Plug: Amp 207464-7 |
|
25-Pin Female Connector |
• Crimp Receptacle: Amp 207463-1 |
|
Connector Shell Kit |
Amp 5745833-5 (metal-plated plastic) |
Questions & Answers
💡 FAQ
Q: What is the brand?
A: GE
Q: What is the type?
A: Serial Bus Transmitter Module
Q: What is the warranty?
A: 1 year
Q: Where is the shipping location?
A: Xiamen
Q: What is the payment method?
A: T/T
why choose us?
We specialize in providing industrial automation and control solutions, including ABB, GE, Bently Nevada, and other critical DCS/PLC components. Here's why customers trust us for their industrial automation needs:
one-stop solution
professional team
Quality Assurance
After-sales service
Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059275924
sales18@htechplc.com
Hot Tags: ge ic695lre001 serial bus transmitter module, ge ic695lre001 serial bus transmitter module manufacturers, suppliers