GE IS220PPROH1A Backup Turbine Protection I/O Pack

Overview
GE IS220PPROH1A is a Mark Vie Standby Turbine Protection (PPRO) I/O module for independent backup overspeed protection systems on gas and steam turbines.
This module is typically used with SPRO (simplex protection) or TPROH#C (triple redundant protection) terminal blocks. It also provides generator synchronization verification and serves as an independent monitor for the main control system.
Note: Voltage signal wiring is subject to length and wire gauge limitations.
🚀Function & Features
- Three IS220PPROH1A modules can be installed on a single SPRO terminal board (standalone protection) or TPROH#C terminal board (TMR redundant protection). They can also be installed directly on a TREA terminal board to implement a single-board TMR protection system.
- The IS220PPROH1A is equipped with two independent 10/100 Mbps Ethernet interfaces for IONet communication with the control module.
- The IS220PPROH1A features a processor, hardware reset circuitry, a watchdog timer, and a built-in sensor for temperature tracking.
- The IS220PPROH1A supports barrier or box terminal block connections.

Specifications
|
Parameter |
Details |
|
Model |
IS220PPROH1A |
| Series | Mark Vie |
|
Emergency Trip Interfaces |
TREG (Gas Turbine), TREL (Large Steam Turbine), TRES (Small/Medium Steam Turbine) |
|
Ethernet Ports |
2 × Independent 10/100 Mbps |
|
Front-Panel Indicators |
- PWR/ATTN (Power/Attention) |
|
Processor
|
32-bit RISC Processor
|
|
Input Points
|
24 Field Signal Input Points
|
|
Output Channels
|
16 Isolated Discrete Output Channels
|
|
Power Supply
|
24VDC
|
|
Max Power Consumption
|
8.5W
|
|
Operating Temperature Range
|
-20 ℃ ~ 70 ℃
|
|
Height (H) |
132 mm |
|
Width (W) |
44mm |
|
Depth (D) |
138 mm |
|
Weight |
0.5 kg |
Model Comparison
|
Model
|
Processor & Memory
|
Communication
|
Main Feature
|
Applicable Scenario
|
|
IS220PPROH1A
|
32-bit RISC,16MB SDRAM+32MB Flash
|
Dual 10/100Mbps Ethernet + IR port
|
Independent backup turbine protection logic, TMR support
|
Power plant gas/steam turbine TMR or simplex safety protection
|
|
IS220PPROH1B
|
32-bit RISC, reduced memory
|
Single Ethernet port
|
Basic protection function, no redundant network
|
Small simplex turbine systems with lower safety requirements
|
|
IS220PSVOH1A
|
Shared processor with main controller
|
Dual Ethernet
|
Valve control I/O, not independent protection
|
Turbine valve position control, not safety trip backup
|
Questions & Answers
💡 FAQ
Q: What is GE IS220PPROH1A used for?
A: The GE IS220PPROH1A Backup Turbine Protection I/O Pack is a protection hardware unit for Mark VIe Speedtronic systems. It runs independent turbine protection logic and provides backup overspeed and emergency trip protection for gas and steam turbines.
Q: What processor and memory does IS220PPROH1A use?
A: It uses a 32-bit RISC processor with 16MB SDRAM and 32MB Flash memory to execute protection logic separately from the main controller.
Q: What is the brand?
A: GE
Q: What is the type?
A: Backup Turbine Protection I/O Pack
Q: What is the warranty?
A: 1 year
Q: Where is the shipping location?
A: Xiamen
Q: What is the payment method?
A: T/T

why choose us?
We specialize in providing industrial automation and control solutions, including ABB, GE, Bently Nevada, and other critical DCS/PLC components. Here's why customers trust us for their industrial automation needs:
one-stop solution
professional team
Quality Assurance
After-sales service




Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059276824
sales7@nseauto.com

Hot Tags: ge is220pproh1a backup turbine protection i/o pack, ge is220pproh1a backup turbine protection i/o pack manufacturers, suppliers, GE IS220PSVOH1B, IS220PSVOH1B


