GE IS220PDOAH1B Discrete Output I/O Pack Module

Overview
GE IS220PDOAH1B Discrete Output I/O Pack Module is a discrete output I/O pack built for the GE Mark VIe turbine control platform. It receives command signals from the main controller and converts these signals into discrete on/off outputs to drive field-side devices. This unit belongs to the distributed I/O family of Mark VIe, exchanging data with the system controller over the UCN backplane bus.
🚀Function & Features
- Supports UCN backplane communication for Mark VIe control network
- Discrete digital output channels for binary control signals
- Galvanic isolation between field circuits and internal logic
- LED indicators for channel status and power status
- Standard rack mount form factor for Mark VIe I/O cabinet
- Hot swap operation permitted under defined system conditions
- Works with matched terminal assemblies for field wiring termination

Specifications
| Item | Parameter |
|---|---|
| Part Number | IS220PDOAH1B |
| Product Type | Discrete Output I/O Pack Module |
| Compatible System | GE Mark VIe |
| Total Output Channels | 16 discrete output points |
| Output Signal Type | Dry contact discrete output |
| Operating Supply Voltage | 24 VDC nominal, 18 VDC to 30 VDC range |
| Contact Rating Per Channel | 0.5 A @ 120 VAC, 1 A @ 24 VDC resistive load |
| Isolation Voltage | 1500 VAC |
| Communication Interface | UCN backplane bus |
| UCN Bus Baud Rate | 12 Mbps |
| Signal Update Rate | 4 ms per channel scan |
| Backplane Power Draw | 3.8 W maximum |
| Operating Temperature Range | 0 °C to 60 °C |
| Storage Temperature Range | -40 °C to 85 °C |
| Relative Humidity | 5% to 95% non-condensing |
| Vibration Tolerance | 2 g, 10 Hz to 150 Hz |
| Shock Tolerance | 15 g, 11 ms duration |
| Physical Dimension | 198 mm × 102 mm × 25 mm |
| Net Weight | 0.32 kg |
| Protection Class | IP20 |
Model Comparison
| Part Number | Signal Type | Channel Count | Main Function |
|---|---|---|---|
| IS220PDOAH1B | Discrete Output | 16 | Transmit binary control signals to field devices |
| IS220PDIAH1B | Discrete Input | 16 | Collect discrete status signals from field sensors |
| IS220PSVOH1B | Analog Output | 8 | Send adjustable analog setpoint signals |
Questions & Answers
💡 FAQ
Q: Can I install IS220PDOAH1B on Mark VI control system?
A: No. This I/O pack is built for Mark VIe and Mark VIeS. Mark VI uses a different backplane and I/O series, and cross installation will not establish communication.
Q: Does this module come with terminal blocks?
A: The listed price covers only the IS220PDOAH1B I/O pack.
Q: Is hot swap supported for this discrete output I/O pack?
A: Hot swap is allowed when the Mark VIe system runs in normal operating mode. Lock out related field circuits before removal to avoid unexpected actuation.
Q: What kind of load can each discrete output channel drive?
A: Each channel is rated for low-power relay and solenoid loads. Check field device current draw against module contact rating before wiring.
Q: What is the brand?
A: GE
Q: What is the warranty?
A: 1 year
Q: What is the payment method?
A: T/T
After-sales service




Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059276824
sales7@nseauto.com

Hot Tags: ge is220pdoah1b discrete output i/o pack module, ge is220pdoah1b discrete output i/o pack module manufacturers, suppliers


