GE IS200VTURH2B VME Turbine Card
Overview
GE IS200VTURH2B is a VME Turbine Card in the Mark VI series. This card has functions such as speed detection, flame monitoring and overspeed protection.
IS200VTURH2B is equipped with 3 LED status lights, cable connectors, 13 transistors, inductors, resistor/capacitor arrays.
IS200VTURH2B is a specific interface for turbine control systems, which can send trip commands in turbines without mechanical overspeed bolts.
🚀Function & Features
- Speed Monitoring: IS200VTURH2B supports 4-way passive magnetic sensor input to monitor shaft speed. In systems without mechanical overspeed bolts, trip commands can be triggered directly.
- Flame Detection: IS200VTURH2B monitors flame detectors to check the state of the combustion chamber. Signal attenuation caused by carbon buildup or contaminants can be detected.
- Current Monitoring: IS200VTURH2B monitors shaft current and voltage to prevent bearing corrosion or insulation failure.
- Dual-Redundant Safety Protection & Trip Logic Output : Equipped with dual-core redundant processors, the card executes independent safety logic operation to avoid single-point equipment failure. When turbine overspeed or flameout fault occurs, the module outputs trip signals through independent dry contact relays to trigger unit interlock protection.
- VME Bus Communication & Cyclic Data Storage : Occupying 2 standard 6U VME rack slots, the module completes high-speed data interaction with the Mark VI system backplane bus. It carries 8GB local storage space for cyclic recording of turbine operating data, fault codes and alarm records. The reserved historical data provides effective basis for post-fault troubleshooting and unit operating condition analysis.
Specifications
|
Parameter |
Details |
|
Model |
IS200VTURH2B |
|
Series |
GE Mark VI |
|
Input Channels |
4 channels from passive magnetic sensors (speed input) |
|
Flame Detector Interfaces
|
8 Geiger-Mueller Flame Detection Channels
|
|
Alarm Classification Levels
|
5 Levels
|
|
Trip Relay Output Specification
|
250V AC 5A Dry Contact Output
|
|
Status Output Specification
|
24V DC 1A Signal Output
|
|
Working Voltage Range
|
18VDC ~ 32VDC
|
|
Maximum Working Current
|
1.5A
|
|
Signal Accuracy
|
±0.25% Full Span
|
|
Flame Detection Interface |
Dedicated input for Geiger - Mueller detectors |
|
Operating Temperature Range
|
0℃ ~ +70℃
|
|
Weight |
Approximately 0.8kg |
|
HS Code
|
8537101100
|
| Dimensions |
260.4mm × 187.3mm × 19.9mm
|
|
Functional Position |
Primary Turbine Protection |
|
Main Control Chip |
FPGA |
|
Alternative Model |
IS200VTURH1B (old version) |
Questions & Answers
💡 FAQ
Q: What is GE IS200VTURH2B used for?
A: GE IS200VTURH2B is a VME turbine protection card, responsible for turbine speed monitoring, flame signal detection and safety trip interlock, supporting normal safety protection functions of GE Speedtronic Mark VI turbine control systems.
Q: Which system does this turbine card adapt to?
A: This module is exclusively compatible with GE Speedtronic Mark VI turbine control systems, matching dedicated VME bus and system safety logic standards.
Q: What are the core configuration parameters of this module?
A: The module features dual-redundant processors, 4 speed input channels, 8 flame detection channels, 8GB cyclic storage and 5-level alarm logic, with 24VDC nominal working voltage and G3 industrial environmental adaptability.
Q: What is the brand?
A: GE
Q: What is the type?
A: VME Turbine Card
Q: What is the warranty?
A: 1 year
Q: Where is the shipping location?
A: Xiamen
Q: What is the payment method?
A: T/T
why choose us?
We specialize in providing industrial automation and control solutions, including ABB, GE, Bently Nevada, and other critical DCS/PLC components. Here's why customers trust us for their industrial automation needs:
one-stop solution
professional team
Quality Assurance
After-sales service
Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059276824
sales7@nseauto.com
Hot Tags: ge is200vturh2b vme turbine card, ge is200vturh2b vme turbine card manufacturers, suppliers, IS200TREGH1BDB, ge mark vi, GE IS200TREGH1BDB Trip Emergency Termination Board, GE IS200TREGH1BDB