EPRO PR6423/005-010 8mm Eddy Current Sensor
Overview:

The EPRO PR6423/005-010 8mm eddy current sensor is a standard non-contact measurement probe designed for use with EPRO's comprehensive machinery condition monitoring hardware systems. This 8mm eddy current displacement sensor converts changes in the gap between a metal shaft and the probe into continuous analog signals, enabling real-time monitoring of radial vibration, shaft displacement, and axial position for various types of industrial rotating equipment.
Operating on the principle of eddy current induction, the EPRO PR6423/005-010 sensor requires no physical contact with the target. It experiences no frictional wear during long-term continuous operation, thereby extending the interval between periodic calibrations and preventing signal drift caused by component wear.
| Main Measurement Ranges |
|---|
|
|
|
|
|
Products Features
- Standard 8mm Measurement Range: The 8mm effective detection range covers standard clearance monitoring requirements for rotating equipment. It supports precise measurement of shaft displacement, vibration, and axial position changes, enabling high-accuracy condition monitoring for high-speed rotating machinery.
- Stable Non-Contact Measurement: Utilizing a non-contact inductive sensing design, it eliminates contact wear and signal deviations caused by mechanical friction. The sensor maintains measurement accuracy during long-term continuous operation, reducing the need for frequent calibration.
- Industrial-Grade Interference Resistance: Built-in shielding effectively resists common factory electromagnetic interference. The sensor operates stably in high-temperature, dusty, and humid industrial environments without signal drift or data distortion.
- High Protection Rating: With an IP66 rating, the sensor unit withstands dust ingress and water jets, allowing for installation in open industrial equipment areas without the need for additional protective enclosures.

Specifications
|
Parameter |
Details |
|
Model |
PR6423/005-010 |
|
Effective Measuring Range |
8mm |
|
Standard Sensitivity |
8V/mm |
|
Linear Error |
≤±1% |
|
Measuring Principle |
Eddy current non-contact induction measurement |
|
Working Temperature |
-35℃ ~ +200℃ |
|
Protection Grade |
IP66 |
|
Frequency Response Range |
0Hz ~ 10kHz |
|
Interchangeability Error |
≤5% |
|
HS Code |
9031809090 |
|
Weight |
0.25kg |
| Dimension |
Probe diameter: 8mm, Probe length: 50mm, Standard cable length: 5m |

Questions & Answers
💡 FAQ
Q: What are the specific measurement range and sensitivity of the PR6423/005-010 eddy current sensor?
A:The sensor features an effective measurement range of 8 mm, with a fixed standard sensitivity of 8 V/mm. All finished units undergo factory calibration to ensure stable and consistent output signals.
Q: For which target materials is this 8 mm eddy current sensor suitable?
A: It is designed specifically for ferromagnetic steels, primarily 42CrMo4 and AISI 4140. Non-ferromagnetic metals can cause measurement inaccuracies, so their use is not recommended.
Q: Does the PR6423/005-010 sensor support high-temperature operating conditions?
A: Both the probe and the accompanying shielded cable operate stably within a temperature range of -35°C to +200°C, making them suitable for the high-temperature environments found in turbines, compressors, and other thermal equipment.
Q: What is the frequency response range of this EPRO eddy current sensor?
A: The frequency response range is 0 Hz to 10 kHz. Amplitude-frequency attenuation is controlled to within 1% in the 0–1 kHz range and within 5% at 10 kHz, meeting the requirements for industrial high-frequency vibration monitoring.
Q: Is the PR6423/005-010 compatible with monitoring systems from other brands?
A:It is perfectly matched with EPRO's original industrial condition monitoring systems. Additionally, with simple parameter calibration, it can be adapted for use with most mainstream third-party industrial monitoring equipment that accepts analog signal inputs.
Q: What are the linearity error and interchangeability error of this sensor?
A: The factory-calibrated linearity error is ≤±1%, and the product interchangeability error is controlled within 5%. Consistent parameter standards are maintained across product batches, facilitating easy replacement.
Q: Can this sensor be used for long-term, continuous online monitoring?
A: The sensor utilizes the non-contact eddy current sensing principle; there is no mechanical friction or wear during operation, making it suitable for 24/7 long-term online monitoring of industrial rotating equipment.
Q: Will electromagnetic interference affect the sensor's measurement accuracy?
A: The sensor features a built-in anti-interference shielding structure capable of withstanding electromagnetic interference common in industrial environments; under normal industrial operating conditions, it exhibits no signal drift or data distortion.
Q: What is the brand?
A: EPRO
Q: What is the type?
A: Eddy Current Sensor
Q: What is the warranty?
A: 1 year
Q: Where is the shipping location?
A: Xiamen
Q: What is the payment method?
A: T/T

why choose us?
We specialize in providing industrial automation and control solutions, including ABB, GE, Bently Nevada, and other critical DCS/PLC components. Here's why customers trust us for their industrial automation needs:
one-stop solution
professional team
Quality Assurance
After-sales service




Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059276824
sales7@nseauto.com

Hot Tags: epro pr6423/005-010 8mm eddy current sensor, epro pr6423/005-010 8mm eddy current sensor manufacturers, suppliers, , vibration analysis software, inductance measurement, fault diagnosis system


