Products Overview

Bently Nevada 330192-10-80-90-05 is a 3300 XL 8 mm Extended Temperature Range (ETR) armored eddy current proximity probe, supplied as standard with a 3/8-24 UNF thread. This probe is an upgraded version based on the 3300 Series, is used in conjunction with a 3300 XL Proximitor, and supports interchangeability with standard-temperature and non-XL components of the same series.
Products Technical Specifications
| Parameter | Description |
|---|---|
| Model Number | 330192-10-80-90-05 |
| Related Model | 330192-10-80-90-CN |
| Probe Type | Eddy Current Proximity Probe |
| Series Model | 3300 XL Series |
| Probe Diameter | 8 mm |
| Thread Specification | 3/8-24 UNF |
| Cable Sheath | With Armor |
| Extended Temperature Range (ETR) Systems (5 and 9 meter) | Sensitivity: 7.87 V/mm (200 mV/mil) ±6.5% |
| Minimum Target Size (Flat Target) | Diameter: 15.2 mm (0.6 in) |
| Minimum Shaft Diameter | 50.8 mm (2 in) |
Special Application Notes
- When used for keyphasor or overspeed measurements, refer to the specific application instructions.
- The supplied silicone tape is not recommended for use as a connector seal when exposed to turbine oil environments.
Products Fuction

- Extended Temperature Range: The 330192-10-80-90-05 ETR probe cable and connector, as well as the ETR extension cable, can withstand ambient temperatures up to 260 °C. However, the probe tip itself must still be maintained below 177 °C.
- Narrow Side-View Requirement: For 330192-10-80-90-05, a dedicated 3300 NSv™ narrow side-view sensor system should be selected.
- Operation and Maintenance Functions: The 330192-10-80-90-05 can be used in special applications such as overspeed protection and speed measurement, providing data support for safety control.
Products Application
Bently Nevada 330192-10-80-90-05 eddy current probe system can be used for:
1.Gearboxes and high-speed drive systems: Monitoring the relative vibration of gear shafts and analyzing mesh frequency components.
2.Reciprocating compressors: Monitoring the lateral position of crosshead pins or piston rods (requires specific installation methods) to assess wear conditions.
3.Small shaft diameter applications: This system can be selected for applications with a minimum shaft diameter of 50.8 mm and a target area diameter greater than 15.2 mm.
Questions & Answers
💡 FAQ
Q: What is the payment method?
A: T/T
Q: Is technical support available?
A: Yes, we have a professional technical team to address technical issues.
Q: What is the warranty?
A: 1 year
Q: What is the return and exchange policy?
A: Returns or exchanges are accepted within 7 days of receiving the goods if there are any quality issues, excluding damage caused by human error or misuse.
Q:What are the available shipping methods?
A: FedEx, DHL, UPS, and others.
After-sales service




Our Partners








Hot Tags: 330192-10-80-90-05,Bently Nevada 330192-10-80-90-05,Bently Nevada 330192-10-80-90-05 3300 XL 8 mm ETR Probe, process monitoring strategies


