Overview：
IPC707 244-707-000-012 Signal Conditioner
The IPC707 244-707-000-012 Signal Conditioner is a VME plug-in signal processing card built to pair with eddy current proximity probes. This IPC707 signal conditioner generates high-frequency excitation signals for displacement probes, then converts weak modulated feedback signals into standard analog signals readable by machinery monitoring rack boards.
Raw signals transmitted directly from eddy current probes tend to experience attenuation and electromagnetic interference over long wiring paths. The 244-707-000-012 unit incorporates filtering, amplification and demodulation circuits to stabilize signal output and lower temperature drift during long continuous equipment operation. It fits standard slot positions inside VM600 and AMS6500 monitoring racks.
parameters:
| Item | Parameter |
|---|---|
| Part Number | 244-707-000-012 |
| Model | IPC707 Signal Conditioner |
| Supported Probes | 8mm / 11mm eddy current proximity probes |
| Bus Connection | Standard VME rack backplane bus |
| Power Input | 24VDC supplied through rack backplane |
| Continuous Operating Temperature | -20℃ ~ +55℃ |
| Storage & Transportation Temperature | -40℃ ~ +80℃ |
| Protection Rating | IP20 |
| HS Code | 9031809090 |
| Length | 220mm |
| Width | 34mm |
| Height | 165mm |
| Weight | 0.31kg |
Function & Features：
- Internal dedicated high-frequency oscillation circuit supplies excitation power for standard eddy current proximity probes
- Compatible with 8mm and 11mm non-contact displacement probes used to measure shaft clearance and vibration values
- Multi-stage active filtering circuit removes industrial electromagnetic noise mixed into probe feedback signals
- Continuous internal circuit monitoring identifies probe open circuits, short circuits and abnormal signal loss
- Standard VME backplane bus interface supports stable data exchange with rack main acquisition cards
- Independent overcurrent and short-circuit protection cuts signal output automatically to prevent damage to probes and the module itself
Questions & Answers
💡 FAQ
Q: Which monitoring systems work with the IPC707 244-707-000-012 signal conditioner?
A: This IPC707 unit acts as intermediate signal processing hardware for eddy current proximity probes, and fits VM600 and AMS6500 machinery health monitoring racks. It converts raw probe signals into standard analog data readable by rack acquisition cards.
Q: What sizes of eddy current probes can this signal conditioner match?
A: The internal oscillation circuit supports standard 8mm and 11mm eddy current probes widely used for turbine and compressor shaft monitoring.
Q: What two types of output signals can the IPC707 module generate?
A: After filtering and demodulation, the module outputs DC gap voltage that reflects clearance between probe and rotor, and AC vibration voltage that reflects rotor vibration amplitude.
Q: Can the IPC707 244-707-000-012 be replaced without shutting down the monitoring rack?
A:Hot-swap function is supported. Operators can remove and install the signal conditioner individually without cutting power to the whole monitoring cabinet.
Q: Can this module automatically detect faults on probe wiring?
A: Continuous circuit monitoring tracks probe open circuits, short circuits and signal loss. The front panel LED lights up to mark abnormal channels for maintenance staff.
Q: What is the warranty?
A: 1 year
Q: What is the return and exchange policy?
A: Returns or exchanges are accepted within 7 days of receiving the goods if there are any quality issues, excluding damage caused by human error or misuse.
Q:What are the available shipping methods?
A: FedEx, DHL, UPS, and others.
Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059276824
sales7@nseauto.com
why choose us?
We specialize in providing industrial automation and control solutions, including ABB, GE, Bently Nevada, and other critical DCS/PLC components. Here's why customers trust us for their industrial automation needs:
one-stop solution
professional team
Quality Assurance
After-sales service
Our Partners
Hot Tags: ipc707 244-707-000-012 signal conditioner, ipc707 244-707-000-012 signal conditioner manufacturers, suppliers, charger spares, obsolete spares, optical drive spares, panel spares, retailer spares, side panel spares