
Overview
GE IS200TBAIH1C is the analog input terminal board for the Mark VI series gas turbine control system. This terminal board is a field analog instrument that serves as a "transfer and preprocessing hub" for analog signals.
It connects to sensors/transmitters on one side and communicates with the I/O processor through a dedicated connector on the other side. It serves as the physical interface and signal conditioning center between the upper-level control module and the control module.
🚀Function & Features
- Input Support: The IS200TBAIH1C can connect to two-wire, three-wire, and four-wire transmitters.
- TMR Output: The IS200TBAIH1C features three connectors (JR, JS, and JT) for connecting to the redundant R, S, and T I/O processors. An on-board current shunt combines the total current from the three output drivers into a single signal that is fed back to the electronics for regulation.
- Identification Chip: This chip stores the IS200TBAIH1C terminal board's serial number, board type, revision number, and connector location. The I/O controller reads this ID and generates a hardware fault if it does not match the expected value.

Technical Specifications
|
Parameter |
Details |
|
Model Number |
IS200TBAIH1C |
|
Connection Modes |
-TMR connection (using all three connectors) |
|
Terminal Quantity |
2 terminal blocks, each containing 24 terminals |
|
Wire Gauge Support |
Maximum #12 AWG |
|
Signal Type Config |
Configured via jumpers (J#A, J#B, JO) |
|
Input Channel Quantity
|
10 Analog Input Channels
|
|
Output Channel Quantity
|
2 Analog Output Channels
|
|
Supported Signal Type
|
4-20mA Current Signal, ±10VDC Voltage Signal
|
|
Operating Temperature Range
|
-20 ℃ ~ 65 ℃
|
|
Storage Temperature Range
|
-40 ℃ ~ 85 ℃
|
| Length | 330mm |
|
Height |
229.35mm |
|
Width |
136.58mm |
| Weight | 0.5kg |
|
HS Code
|
85371011
|
Model Comparison
|
Model
|
Hardware Feature
|
System Compatibility
|
Applicable Scenario
|
|
IS200TBAIH1C
|
10IN/2OUT, TMR Support, Conformal Coating
|
Mark VI + IS200VAICH1D D Revision+
|
Standard and redundant turbine control system replacement
|
|
IS200TBAIH1CED
|
Basic Channel Configuration, No Enhanced Anti-Interference
|
Basic Mark VI Simplex System
|
Ordinary non-redundant signal acquisition scenarios
|
Questions & Answers
💡 FAQ
Q: What is GE IS200TBAIH1C used for?
A: The GE IS200TBAIH1C is an analog input terminal board, designed for field analog signal termination, filtering and transmission of GE Mark VI Speedtronic turbine control systems.
Q: How many signal channels does this terminal board have?
A: The board is equipped with 10 analog input channels and 2 analog output channels for multi-point field signal collection.
Q: What is the brand?
A: GE(General Electric)
Q: What is the type?
A: Analog Input Terminal Board
Q: What is the warranty?
A: 1 year
Q: Where is the shipping location?
A: Xiamen
Q: What is the payment method?
A: T/T

why choose us?
We specialize in providing industrial automation and control solutions, including ABB, GE, Bently Nevada, and other critical DCS/PLC components. Here's why customers trust us for their industrial automation needs:
one-stop solution
professional team
Quality Assurance
After-sales service




Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059276824
sales7@nseauto.com

Hot Tags: ge is200tbaih1c analog input terminal board, ge is200tbaih1c analog input terminal board manufacturers, suppliers, GE IS200TREGH1BDB, IS200TREGH1BDB, GE IS200TREGH1BDB Trip Emergency Termination Board, ge mark vi


