overview：
ABB HPC800K02 is the ABB HPC800 controller kit [redundant version], belonging to the Symphony Plus SD series. It is a process controller based on a 256 MHz, 32-bit Freescale Coldfire processor.
The kit includes: dual controllers (HC800+CP800+MB810), communication modules (CTB810/811) and terminal boards (TER8x0).
It can be configured through the S+ engineering tool, has more than 150 predefined control algorithms or function code libraries, and also supports C programming, batch processing and user-defined function codes.
Note: The redundancy kit must be configured with the S+ Engineering tool, and the soft controller function requires additional authorization.
Tags：HC800, CP800, MB810,CTB810/811,TER8x0
Fuctions & Features：
Processing power
- 256MHz processor supports closed-loop control with over 5,000 I/O points per second and a scan cycle of <250ms.
- Built-in 150+ predefined algorithm library, compatible with continuous, sequential, batch and advanced control strategies.
- Supports C language programming and user-defined function blocks, expandable to 30,000 function blocks.
Fully redundant architecture
- CPU, power supply, internal bus, I/O network are fully redundant, and fault switching is uninterrupted.
- Dedicated redundant communication bus (CW800), peer-to-peer communication update rate <100ms.
Configuration and rapid deployment
- Online configuration function, supports 8 segmented tasks (minimum cycle 1ms).
- Soft controller simulation function, can pre-debug control logic on PC.
Specification：
|
Property |
Characteristic/Value |
|
Mounting： |
Standard 35mm wide DIN-rail (horizontal) |
|
Processor Configuration： |
|
|
HC800 (Control Processor) |
Key positions to MB810 mounting base: 1 = E, 2 = E |
|
CP800 (Comm Processor) |
Key positions to MB810 mounting base: 1 = C, 2 = C |
|
Microprocessor： |
2× ColdFire 32-bit @256 MHz (1 for HC800 + 1 for CP800) |
|
Memory： |
|
|
HC800 |
64MB RAM + 4MB ROM + 2MB NVRAM |
|
CP800 |
64MB RAM + 4MB ROM |
|
Power Requirements： |
24VDC ±10% @400mA (10W typical); Supports redundant power inputs |
|
Safety Certification： |
Overvoltage Category I (Tested per IEC/EN 61010-1) |
|
Redundancy Performance： |
|
|
Link Speed |
8MB/s (normal operation) |
|
Switchover |
Bumpless switchover |
|
Programmability： |
|
|
Languages |
Function Codes, Batch 90, User Defined Function Codes (UDF) |
|
Function Block Capacity |
Up to 32,000 addressable blocks |
|
Task Segmentation |
Up to 8 segments |
|
Execution Cycle |
Configurable down to 1ms per segment |
Contact us
Our address
Room 1904, Building B, Diamond Coast, No. 96 Lujiang Road, Siming District, Xiamen, Fujian, China
Phone Number
+86 18059275924
sales18@htechplc.com
Hot Tags: abb hpc800k02 hpc800 controller kit, abb hpc800k02 hpc800 controller kit manufacturers, suppliers, ABB FI810F 3BDH000030R1 Fieldbus Module CAN, ABB PM866K01 3BSE050198R1 Processor Unit Kit, ABB PM861AK01 3BSE018157R1 Processor Unit, ABB TB805 3BSE008534R1 Bus Outlet, ABB PM856K01 3BSE018104R1 Processor Unit Kit, ABB AI801 3BSE020512R1 Analog Input 8 Ch Module